HP 9000/382 Questions

[Pete Lancashire]

If I read the doc's correctly I only have the medium resolution system
board, pity the graphics where not a daughter board.

No problem with building a sync separator.

My goal list to use the thing as a GPIB controller. Have quite a few HP
diagnostics that are on tape (and will need to get a
tape drive) that make extensive use of HP Basic.

Final use  is as a bench controller for the same instruments

-pete





On Sun, Jan 24, 2016 at 7:52 AM, Chris Osborn <fozztexx at fozztexx.com> wrote:

>
> On Jan 24, 2016, at 4:18 AM, Rik Bos <hp-fix at xs4all.nl> wrote:
>
> > The VGA is IIRC SOG (Sync On Green) not all monitors support this.
> > If you have a HP-IB/GP-IB interface for a PC you can use Ansgars HPDrive
> to boot.
> > It's found at www.hp9845.net .
>
> I have an HP 9000/360 and I don't have an HP-HIL keyboard or sync on green
> monitor either. I was able to get a console through the built-in RS-232
> port and made it boot NetBSD over ethernet using a Linux box as a server.
>
> --
> Follow me on twitter: @FozzTexx
> Check out my blog: http://insentricity.com
>
>
>