Wanted: Specific Mallory cap...

[Cindy Croxton]

http://5970.iso-group.com/Public/Search_Results.aspx?ss=10X2000

There are in stock here, according to their site.

-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Bill
Sudbrink
Sent: Wednesday, January 06, 2016 11:52 AM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: Wanted: Specific Mallory cap...

Hi all,

I am in the process of restoring/recreating a linear PS as part of a project
and I would like to use the original parts if possible.  I'm looking for six
Mallory axial electrolytic capacitors.  The physical dimensions are 11mm in
diameter by 44mm in length.
They have a clear plastic wrap, so the aluminum silver color shows through.
The printing on them goes around the circumference (not end to end) and
reads:

   +-M-+
2000 MF 10 V
 20-48923

Electrically, they are (were) 2000uf, 10 volt.  My bet is that these are
mil-spec versions of Mallory's
TT10X2000 capacitor.  They physically match some Mallory TT15X1000 caps that
I have in my parts box.
I've been "beating the bushes" for a while now with no luck on the
"20-48923" part number.  I've also contacted all of the web site owners that
claim to have TT10X2000s.  They have all come back with "well, we don't
actually seem to have that part after all".

If anyone has either of the above, I'll pay a good price for them.  They
don't have to be in operational condition electronically, I'll "restuff"
them if necessary.

Thanks,
Bill Sudbrink




---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus