RX02 rx-01 heathkit 8 inch drive for H-11 ( lsi11 heath case drive diff?)
Dave Wade
dave.g4ugm at gmail.com
Thu Aug 4 09:35:08 CDT 2016
In the DEC area. Sorry in Spain at present and can't get to the Forums.
Dave
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of
> COURYHOUSE at aol.com
> Sent: 04 August 2016 08:27
> To: cctalk at classiccmp.org
> Subject: Re: RX02 rx-01 heathkit 8 inch drive for H-11 ( lsi11 heath case
drive
> diff?)
>
> link to area? or topic? Please?
>
>
> In a message dated 8/4/2016 12:00:45 A.M. US Mountain Standard Time,
> dave.g4ugm at gmail.com writes:
>
> There was some discussion on this on the VCFED forums. Might be worth a
> read.
>
> Dave
>
> > -----Original Message-----
> > From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of
> > Richard Cini
> > Sent: 03 August 2016 11:51
> > To: General Discussion: On-Topic and Off-Topic Posts
> > <cctalk at classiccmp.org>
> > Subject: Re: RX02 rx-01 heathkit 8 inch drive for H-11 ( lsi11 heath
> case
> drive
> > diff?)
> >
> > Are you referring to having the H-27 drive from Heath? I don't know
> > for
> sure
> > because I've never seen H27 docs, but the disk capacity is the same
> > as
> the
> > RX01 (256k) and I think the interface was made deliberately
> > incompatible, likely at the behest of DEC. The version of RT-11
> > (called HT-11)
> supposedly
> > used a different floppy device driver.
> >
> > Again, this is based solely on what I've read from various places and
> > not direct experience (I have an H-11 with a SCSI controller; no
> > floppy; and
> it runs
> > RT-11 no problem).
> >
> > Rich
> >
> > Sent from my iPhone
> >
> > > On Aug 3, 2016, at 1:40 AM, COURYHOUSE at aol.com wrote:
> > >
> > > we have a heath h11 which is lsi 11 aka pdp 11/03
> > >
> > > the drives are not rx o1 or rx o2... but are they and the
> > > controller comparable? with rx01 or an rx02?
> > >
> > > Thanks Ed# at smecc
>
>
More information about the cctech
mailing list