Calcomp 1039 plotter docs?

[Jon Elson]

On 09/20/2015 09:38 AM, simon wrote:
> Hi All,
>
> we have a 1039 in our space with the user guide, but 
> without any service docs. Our specimen does not react to 
> buttons except the reset and test buttons. the four 
> statusleds light up on a reset and after a second the 
> center two leds start blinking in sequence. paper and pens 
> are loaded as per the user guide.
>
I have complete docs, plus all boards from a working Calcomp 
1076C (Gigantic E-size 4-pen plotter) with servo motors on 
the axes.  Most likely no parts commonality with the 1039, 
but if you can give some info on the 1039, I could see if 
there might be.

Jon