MicroVAX 3800 DSSI Issues
william degnan
billdegnan at gmail.com
Tue Sep 1 15:23:11 CDT 2015
>>> B/1 DIA0:
SYSBOOT> CONTINUE
On Tue, Sep 1, 2015 at 4:13 PM, Kyle Owen <kylevowen at gmail.com> wrote:
> I can boot to VAX/VMS 5.4-2, but on startup, I see this message:
>
> %DCL-E-OPENIN, error opening DUB0:[RS1R4]RS1LOG.COM; as input
> -RMS-E-DNR, device not ready, not mounted, or unavailable
> %DCL-E-OPENIN, error opening DUB0:[ORACLES]ORAUSER.COM; as input
> -RMS-E-DNR, device not ready, not mounted, or unavailable
> %DCL-E-OPENIN, error opening DUB0:[ECMS4]LOGIN.COM; as input
> -RMS-E-DNR, device not ready, not mounted, or unavailable
>
> Okay, so DUB0: isn't mounted, I guess.
>
> ROHIT1$ show dev
>
> Device Device Error Volume Free
> Trans Mnt
> Name Status Count Label Blocks
> Count Cnt
> R7CY2A$DIA0: Mounted 0 VMS54_2DISK 173289
> 134 1
> ROHIT1$DUB0: Online 0
> ROHIT1$DUB1: Online 0
> ROHIT1$DUC10: Online 0
>
> Device Device Error Volume Free
> Trans Mnt
> Name Status Count Label Blocks
> Count Cnt
> ROHIT1$MUA0: Online 0
>
> Device Device Error
> Name Status Count
> FTA0: Offline 0
> OPA0: Online 0
> TWA0: Offline 0
>
> Device Device Error
> Name Status Count
> IKA0: Offline 0
> IMA0: Offline 0
> INA0: Offline 0
> PTA0: Online 1
> PUA0: Online 1
> PUB0: Online 2
> PUC0: Online 2
> PYA0: Offline 0
> SJA0: Online 0
> SJA1: Online 0
> WSA0: Offline 0
> XQA0: Online 0
>
> Looks like they're online but not mounted. If I'm reading the help pages
> correctly, I should just be able to mount it at this point:
>
> ROHIT1$ mount dub0: disk0
> %MOUNT-F-INCVOLLABEL, incorrect volume label
> -MOUNT-I-VOLIDENT, label = 'USER01 ', owner = ' ', format =
> 'DEC
> FILE11B '
>
> I tried giving it the correct label, but it still didn't seem to mount. Now
> I wanted to see if the MSCP server is running:
>
> ROHIT1$ show device/served
> MSCP-Served Devices on ROHIT1 1-SEP-2015 10:55:19.39
>
> Queue Requests
> Device: Status Total Size Current Max Hosts
> %SHOW-E-MSCPNOTLD, MSCP-Server code not loaded
>
> No, it doesn't look like it...so getting back to the >>> prompt, I do a bit
> more investigation:
>
> >>>show dev
> UQSSP Disk Controller 0 (772150)
> -DUA0 (RF71)
>
> UQSSP Disk Controller 1 (760334)
> -DUB0 (RA81)
> -DUB1 (RA81)
>
> UQSSP Disk Controller 2 (760340)
> -DUC10 (RA81)
>
> UQSSP Tape Controller 0 (774500)
> -MUA0 (TK70)
>
> Ethernet Adapter 0 (774440)
> -XQA0 (08-00-2B-17-3F-37)
>
> I should be able to get to the PARAMS> prompt now:
>
> >>>set host /dup/uqssp/disk 1 params
> Starting DUP server...
>
> UQSSP Disk Controller 1 (760334)
>
> Stopping DUP server...
> >>>
>
> Or not? Why can't I seem to get to the prompt? I can with disk 0:
>
> >>>set host /dup/uqssp/disk 0 params
> Starting DUP server...
>
> UQSSP Disk Controller 0 (772150)
> Copyright 1988 Digital Equipment Corporation
>
> PARAMS> show allclass
>
> Parameter Current Default Type Radix
> --------- ---------------- ---------------- -------- -----
> ALLCLASS 0 0 Byte Dec B
>
> PARAMS>
>
> Can't seem to get to PARAMS> with disk 2 or tape 0 either. Only disk 0
> seems to work.
>
> Can anyone provide any suggestions? I'd like to see what else is on the
> system. Pictures here: http://imgur.com/a/WYGra
>
> Thanks,
>
> Kyle
>
--
Bill
vintagecomputer.net
More information about the cctech
mailing list