Massey Dickinson - help identify

[Dave G4UGM]

Well I guess you could use it for many things. It looks like one paper tape reader or perhaps punch,  I think there are 60 lamp drivers, a few AND gates, lots of OR gates. A counter. Delay circuits and memories.
So a Trainer is possible...

Dave
G4UGM

> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Nick Allen
> Sent: 29 October 2015 22:44
> To: cctalk at classiccmp.org
> Subject: Re: Massey Dickinson - help identify
> 
> here are some close up photos:
> 
> https://goo.gl/photos/1hxkfkei4jKoWXtP8
> 
> https://goo.gl/photos/jhaqLndqbkqX4kV68
> 
> https://goo.gl/photos/dmZVBV3gwGJqSZK58
> 
> https://goo.gl/photos/sKJorbim7eRTsdVQ8
> 
> https://goo.gl/photos/sy6UcUCCPnRHB4ic8
> 
> On 10/29/2015 5:28 PM, Nick Allen wrote:
> > Looking for help identifying these 2 pieces of Massey Dickinson
> > equipment.
> >
> > I was told this machine is a trainer of sorts, but have my doubts:
> > https://goo.gl/photos/ktBMTiYXxLZd8dH1A
> >
> > But per the research I have done, the only reference of Massey
> > Dickinson and PDP8s are for Data Acquisition, I assume that is what
> > this machine is for (was interfaced to a PDP8i):
> > https://goo.gl/photos/cqwTHmb6QhGKfgwy9
> >
> > Thanks everyone!
> >
> > -Nick
> >
> >