Trying to get my RLV11 working

[Johnny Billquist]

On 2015-10-29 20:22, Ethan Dicks wrote:
> On Thu, Oct 29, 2015 at 2:52 PM, Glen Slick <glen.slick at gmail.com> wrote:
>> In case anyone happens to be looking for the cab kit, conflansrd / JT
>> Computer has had one listed on eBay for a while:
>>
>> http://www.ebay.com/itm/151628333033
>> CK-RLV1A-KA 15' CABLE RLV12 M8061 CABKIT FOR BA23 (USED)
>
> That's not the cab kit I was thinking of, but it's _a_ cab kit.
>
> The one I'm thinking of (and can't find a picture online of) is a
> black-painted metal bracket with space to mount two of those ZIF
> connectors, with a bit of bent metal that positions a threaded hole
> about the same relationship to the drive cable as the strain-relief
> screw point on the back of the drives.  It's really just a metal box
> with 4 sides, a hole for the ZIF connectors, and open to the side with
> the round cables, with a lip for that screw.  You mount this metal box
> somewhere on your H960 (or other rack) and run a BC08 cable into your
> RL11.  I know I have one on my 11/24, and I probably have 2-3 more for
> other systems.

Sounds like the typical cab kit for large cabinets. Not something you 
normally want if you have a BA23... :-)

Ie. there are several can kits, for different cabs.

	Johnny

-- 
Johnny Billquist                  || "I'm on a bus
                                   ||  on a psychedelic trip
email: bqt at softjar.se             ||  Reading murder books
pdp is alive!                     ||  tryin' to stay hip" - B. Idol