Trying to get my RLV11 working

Ben Sinclair ben at bensinclair.com
Thu Oct 29 12:37:04 CDT 2015


I only have one RL02, so I think that cable should work. I ordered it anyway!

I'll keep an eye out for other controllers, but I think I will order
an extender and attempt to debug the one I have.

On Thu, Oct 29, 2015 at 12:17 PM, Ethan Dicks <ethan.dicks at gmail.com> wrote:
> On Thu, Oct 29, 2015 at 12:52 PM, Ben Sinclair <ben at bensinclair.com> wrote:
>> Thanks! I did find someone who has the bc80m cable available, which I
>> believe is a ribbon type of connector with a ground strap on one end,
>> then a round cable to the berg connector for the back of the RL02. I
>> think it's the cable pictured here:
>> http://www.cosam.org/computers/dec/pdp11-23/20080403.html
>
> Yes.  That's a BC80M, but it's not a ribbon cable on the controller
> end, it's the splayed end of the round cable (12 pair + 1, IIRC) with
> crimped gold pins and a 44 position Berg connector.  You can use those
> if you don't have a cab kit (which is really just a bracket for the
> rack, a 40-pin ribbon cable, and one of those odd ZIF connectors like
> on the back of the drive to transition from flat cable to round cable)
> but then you'll need a drive-to-drive RL cable.
>
>> The RLV11 and RLV12 seem hard to find, at least on eBay
>
> It's been a long time since these were easy to find.
>
> -ethan



-- 
Ben Sinclair
ben at bensinclair.com


More information about the cctech mailing list