SWTPC CT1024

Brad unclefalter at yahoo.ca
Fri Oct 16 16:28:54 CDT 2015


Definitely not socketed.

-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Chuck Guzis
Sent: Friday, October 16, 2015 2:22 PM
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: SWTPC CT1024

On 10/16/2015 02:15 PM, Brad wrote:
> Side note.. I found some CT-1024 documentation online and it suggested 
> 110 baud.  So I set it at that.. it generates nothing but the 
> occasional 8 now.
>
> I'm interested to see how much of my issue is RAM... I've suspected 
> RAM from the start with a lot of this and have some NOS MM2102N chips 
> coming to try out.  I'm assuming I can piggyback those and see if we 
> get anywhere.

My CT1024 kit shipped with 6 sockets for those chips on the memory board.
The chips themselves came in a foil-wrapped package.  So your board is
un-socketed?

--Chuck




-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6172 / Virus Database: 4447/10805 - Release Date: 10/12/15



More information about the cctech mailing list