RL01/02 spindle ground brushes

[Paul Anderson]

I have a friend with a lathe and that was his thought too. It should work
fine, but he doesn't have CNC.

Do you have a good source for graphite rod?  I'm looking for some for
another project.

Thanks, Paul

On Tue, Mar 3, 2015 at 6:12 PM, Christopher Parish <
christopher.parish at parishcomputers.com> wrote:

> I have a friend working on CNCing new ones out of graphite blocks using
> the dimensions I took off a good one.  It's all highly experimental right
> now, but I'll report back on how it goes.
> Christopher Parish
>
> On Tuesday, March 03, 2015 15:32, Jacob Ritorto wrote:
>
> >Although I haven't yet deemed it scrap, one of my 5 'was-working-fine'
> >RL02s isn't powering up correctly.   Let me know if you find no sources
> >more appropriate.
> >
> >On Tue, Mar 3, 2015 at 3:23 PM, Paul Anderson <useddec at gmail.com> wrote:
> >
> >> Does anyone have any scraped out RL drives with brushes they don't need?
> >>
> >> I need 4 or so and will pay cash (Paypal) or trade.
> >>
> >> Thanks, Paul
> >>
>