Need DZQ11 (M3106) Print Set

[Paul Anderson]

I might have a set and will try to check tomorrow.


On Wed, Jun 10, 2015 at 12:08 PM, Noel Chiappa <jnc at mercury.lcs.mit.edu>
wrote:

> So I'm working with a group of 'busted' DZQ11's (the symptom is that Master
> Clear - 020 - bit in the CSR stays set, even if I write a 0 to the CSR),
> and
> so I need access to a set of prints for this card; they are MP-01795. They
> don't seem to be online anywhere, though.
>
> (They may not be fixable, because a lot of the circuitry is in a large
> custom
> chip, which is of course now unobtainium, but I'm hoping it's something
> simple.)
>
> This is a relatively recent card, so I'm hoping someone out there has a
> set.
> If not, I can probably dope out how it works from the Maintainence Manual
> (which _is_ available), but it would be _much_ easier if I have some
> prints to
> look at too...
>
> I would gladly scan them in for general distribution/use, if someone has a
> set
> they can loan me. I do have an A3 professional level scanner on a SCSI, so
> it's a snap for me to scan prints. (Or if someone wants to scan them
> themselves, that's of course fine too!)
>
> Thanks in advance, and I'm crossing my fingers! :-)
>
>      Noel
>