PDP-8/M restoration project

Paul Anderson useddec at gmail.com
Sat Feb 21 22:46:16 CST 2015


Hi Brian,

I've been very busy the last few weeks too.

I have the M8650s and the M8320s. I'll have to check on the M851s- I might
be getting low on them.

If you want to call me in the next hour of so, go for it. I,m booked most
of tomorrow and Monday.

Thanks, Paul
217 586 5361


On Sat, Feb 21, 2015 at 9:33 PM, Brian L. Stuart <blstuart at bellsouth.net>
wrote:

> Paul,
> I can't believe it's been so long since you wrote to me.  I
> apologize for not getting back with you sooner.  It looks
> like I'll just need 2 of the H851s for the M8300 and M8310
> cards.  The other thing I especially need is an M8320
> Bus Load Card.
>
> Beyond those, I've got a line on an M8650 async card,
> but I'm thinking I may want two before it's over with.  So
> if you've got one for a good price I might be interested
> in it too.  At the moment at least, I'm planning to either
> get one of Vince's memory cards or to build something
> similar.
>
> Thanks
> BLS
>
> --------------------------------------------
> On Mon, 12/29/14, Paul Anderson <useddec at gmail.com> wrote:
>
>  Subject: Re: PDP-8/M restoration project
>  To: "General Discussion: On-Topic and Off-Topic Posts" <
> cctalk at classiccmp.org>
>  Date: Monday, December 29, 2014, 1:10 AM
>
>  Hi Brian,
>
>  How many of the H851s do you need? Where are you located?
>
>  Can you call me some afternoon or night this week?
>  till 11PM Chicago time
>  is fine.
>
>  Thanks, Paul
>  217-586-5331
>
>  On Mon, Dec 22, 2014 at 4:44 PM, Brian L. Stuart <blstuart at bellsouth.net>
>  wrote:
>
>  > For any of you who are on more than one of these lists,
>  I apologize
>  > in advance for your getting multiple copies of this.
>  >
>  > Now that I'm moved into the new place and the man cave
>  (my basement)
>  > is converging on a usable state and in recognition of
>  the upcoming 50th
>  > anniversary of the introduction of the PDP-8, I'm about
>  to embark on a
>  > project to restore a PDP-8/M I got a while back.
>  Unfortunately, this one
>  > is somewhat incomplete..  So I'm looking to start
>  collecting some of the
>  > bits I'll need before it's all said and done.  The
>  items I need are in
>  > descending
>  > order of priority:
>  >
>  > KK8E M8320 Bus load module
>  > KL8E M8650 Async module
>  > H851 Inter-module jumper blocks for the CPU boards
>  > Memory
>  > Storage device and controller
>  > Power switch key
>  > One front panel switch paddle
>  >
>  > If you have any of those that you're looking to unload
>  (especially
>  > the M8320 or the M8650), let me know.
>  >
>  > Obviously, I can live without the switch paddle and I
>  should be able to
>  > get a new key cut, but if anyone has extras lying
>  around, I promise to
>  > give them a good home.  The truth is I don't
>  expect to come up with
>  > memory or storage devices for what I can justify
>  spending.  However,
>  > it turns out I do have an Omnibus prototype
>  board.  So I'm planning
>  > to use that to build a device to emulate a set of RK05s
>  using an SD
>  > card for storage, and if need be, I can put memory on
>  there too.
>  >
>  > Thanks in advance,
>  > BLS
>  >
>  >
>
>


More information about the cctech mailing list