XY11 Manual, Anyone? BONK

[Stefan Skoglund (lokal användare)]

ons 2015-12-23 klockan 13:28 +0000 skrev Dave G4UGM:
> Surely there is a copy of CalComp Host Computer Basic Software (HCBS)
> around somewhere that talks to the XY11. After all the Calcomp is
> pretty thick. All it can do is move 1 step at once, well it can do
> diagonals as well, but pretty thick...
> 
> Dave
> G4UGM
> 
> > -----Original Message-----
> > From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of
> > Stefan
> > Skoglund (lokal användare)
> > Sent: 23 December 2015 11:07
> > To: cctalk at classiccmp.org
> > Subject: Re: XY11 Manual, Anyone?
> > 
> > 
> > > > Then for software I found a diagnostic, XXYAD0 that supposedly
> > > > should draw a square and a rectangle.
> > > > 
> > > > Anyone know of other drawing software that uses the XY11
> > > > 
> > > > /Mattis
> > > 
> > > The book 'The Minicomputer in the Laboratory' by James W Cooper
> > > covers
> > > using an X-Y plotter with an 11/05, and has assembly listings and
> > > a
> > > whole bunch of related stuff about scientific plotting. Also a
> > > lot of
> > > info on using the LPS-
> > > 11 too.
> > > There are plenty of copies out there and quite cheap too. It's an
> > > excellent book and could be of use to you.
> > > 
> > > Steve.
> > > 
> > 
> > Boken finns i Umeå universitets boksamling (även på
> > fysikinstitutionen.)
> > Det verkar inte finnas något exemplar i Uppsala däremot. :-) Kastad
> > ?
> 

Sorry Dave, i replied in Swedish to the list, my answer was really
directed to Mattis (and the other  swedish speaking members....)

It seems that in Swedish university libraries exists three examples
(search thru libris.kb.se.) Mattis can borrow the book from Umeå thru
 Kungliga biblioteket i Kungsträdgården (Stockholm.)

Swedish libraries has an agreement to facilitate "fjärrlån" (remote
borrowing.)