VAX4000/300 MNS7.3 isntallation from CDROM

Holm Tiffe holm at freibergnet.de
Fri Aug 7 11:22:46 CDT 2015


Hmm.. it seems that the pdf is containing thestuff that I've already read
somewhere on HP's website.

There are two possibilities:


[>>> B/R5:10000000 DKA400:
[
[
[If you are booting from an InfoServer device, enter a command that
[specifies root 1. For example, on a VAX 6000 computer, enter:
[
[
[>>> B/R5:10000100/X:D/B:6 ET0
[

Ok, the first should fit with an abbrevation:

 B/R5:10000000 DUA3

(I have a VAX4000-300 not an VS4000/90, nor I have an VAX6000..)

and this boots until the message with the write protected disk
dua3..(sorry, don't have it handy..) and than the system hangs.

When I simply boot  B dua3 the install system asks for a date
and I finally get a "$". Thats all..

That's why I've asked what todo..

Regards,

Holm





Jerry Weiss wrote:

> Follow the OpenVMS VAX Version 7.3 Upgrade and Installation Manual
> AA?QSBQD?TE  http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04623149&lang=en-us&cc=us <http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04623149&lang=en-us&cc=us>
> 
> Section 3 takes you through the basics on how create a new disk.   I used the same procedure just last week.
> 
> 
> Good Luck.
> 
> 
> > On Aug 7, 2015, at 10:26 AM, Holm Tiffe <holm at freibergnet.de> wrote:
> > 
> > Hi,
> > 
> > I've got an VAX4000/300 eqipped with an TK70, 2x RF31, 1xRF71 disks,
> > and an CQD-200/TM.
> > I've connected an toshiba Xm5701 drive to the SCSI Bus and the machine sses
> > it as DUA3. I have a VMS7.3 CDROM and want to install it on one of the
> > disks.
> > I've read some documents on HPs website but it isn't clear to me
> > how to boot the cdrom correctly, there is root 1 mentioned.
> > What bootflag must entered, B/R5:10000000?
> > ..in the case w/o the R5:10000000 I get a $ Promt finally (here I habe to
> > read further). With the bootflag the System is complaining that dua3 is
> > write protected (it is the cdrom)...
> > 
> > What's the correct way to install VMS on that machine?
> > 
> > Regards,
> > 
> > Holm
> > -- 
> >      Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, 
> >     Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
> >  www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
> > 

-- 
      Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, 
     Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
  www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741



More information about the cctech mailing list