HP 2113e Battery resistor

[pdaguytom .]

I've got some pins that appear to be the right size from when I was making
battery packs (electric R/C) that I plan to solder to the resistor with a
little bit of heat shrink on each leg to keep from starting fires or other
exciting things from happening.  A sorta kludge.  I remember using these
style plugs when I was at Timex working as a tech in there Thinfilm dept.
Dang, that was 30 years ago!

On Fri, Jun 19, 2015 at 1:54 PM, Glen Slick <glen.slick at gmail.com> wrote:

> BTW, are you building your own plug with the ~820 ohm resister? For
> now I just have something kludged up with dangling wires attached to a
> resister and no proper pins and plug housing. When I looked for the
> correct plug housing in the past it seemed that part was no longer
> available for purchase that I could find. Have you found a proper plug
> housing to use for this?
>
> I have one of these 12944-60002 cables and can only see the AMP brand
> on the connectors and no part number:
> http://www.computerhistory.org/collections/catalog/102728386
>
>
> -Glen
>