Retro Chip Tester Pro, US shopping basket?

[William Sudbrink]

I'm talking about this guy:

https://www.ebay.com/itm/133957290061?hash=item1f307a084d%3Ag%3ASPMAAOSwTpJhr8DA&nma=true&si=Jv7lwO0W4lizYwsCX3KDWMC0wiA%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557

He's in the US.

-----Original Message-----
From: s shumaker [mailto:shumaker at att.net] 
Sent: Friday, January 14, 2022 2:02 PM
To: William Sudbrink <wh.sudbrink at verizon.net>; 'General Discussion: On-Topic and Off-Topic Posts' <cctalk at classiccmp.org>
Subject: Re: Retro Chip Tester Pro, US shopping basket?

Ya except his web page say no US sales... is he being flexible if one asks nicely?

Steve

On 1/14/2022 9:16 AM, William Sudbrink wrote:
> Oh, US source, no.  You have to buy straight from Stephan.
> But there is a guy on ebay who builds and sells them.
> But you'll pay a premium.  I considered it, but I like to build things myself.
>
> The parts scavenger hunt?  Not so much.
>
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of 
> William Sudbrink via cctalk
> Sent: Friday, January 14, 2022 11:50 AM
> To: 's shumaker' <shumaker at att.net>; 'General Discussion: On-Topic and 
> Off-Topic Posts' <cctalk at classiccmp.org>
> Subject: RE: Retro Chip Tester Pro, US shopping basket?
>
> He just added 2708 programming to it.  Which is extremely useful.
>
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of s 
> shumaker via cctalk
> Sent: Friday, January 14, 2022 11:20 AM
> To: cctalk at classiccmp.org
> Subject: Re: Retro Chip Tester Pro, US shopping basket?
>
> Seems like a very useful gadget.  Any suggestions for a US source?
>
> Steve
>
> On 1/13/2022 1:18 PM, Santo Nucifora via cctalk wrote:
>> Hi Bill,
>>
>> I have a Digikey shopping cart for most of the items and another for 
>> Mouser for the rest of the items but mine was Rev "i".  I did this 
>> back in August and I looked at the cart and noticed that  some of the 
>> items may have substitutes now.  I know I had to do a few substitutes 
>> when I followed the BOM even back then.  I'll post them here but 
>> please be careful and check the BOM from the RTC (Retro Chip Tester) Google site you were emailed
>> against these carts.    Again, you may have to make some substitutes and
>> some of the other components may not line up exactly but that's the 
>> nature of these pre-created carts, unfortunately.  It will at least 
>> give you a good start:  Note, I ordered from a Digikey.ca site but I 
>> created an identical US cart for a friend in the US that was building one as well.
>> Again, triple check everything.
>>
>> Digikey US cart:  https://www.digikey.com/short/d9vrt54z
>> Mouse CA cart for 4 items not at Digikey (but they may be there now?):
>> https://www.mouser.ca/ProjectManager/ProjectDetail.aspx?AccessID=9e70
>> 7
>> cf7c4
>>
>> BTW, good choice on a Christmas present.  You will wonder how you did 
>> without it.
>> Hope this helps,
>> Santo
>>
>> On Thu, Jan 13, 2022 at 3:46 PM William Sudbrink via cctalk < 
>> cctalk at classiccmp.org> wrote:
>>
>>> In response to my wife's "Buy yourself a Christmas present"
>>> direction, I've ordered a Retro Chip Tested Pro board.  When you 
>>> purchase the board, you get a BOM and links to stored shopping 
>>> baskets for some European vendors.  Has anyone built this in the US 
>>> and stored their basket with a US vendor?  Rev 1.2k by the way, but 
>>> any basket would be helpful as the BOM differences between the 
>>> versions are listed.
>>>
>>>
>>>
>>> Thanks,
>>>
>>> Bill S.
>>>
>>>
>>>
>>> --
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>
>
> --
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>


-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus