Testing H745 Regulators

Rob Jarratt robert.jarratt at ntlworld.com
Fri Feb 18 16:42:46 CST 2022


I found a 400V part on Mouser and ordered that. 

> -----Original Message-----
> From: Jonathan Chapman <lists at glitchwrks.com>
> Sent: 18 February 2022 21:23
> To: rob at jarratt.me.uk; Rob Jarratt <robert.jarratt at ntlworld.com>; General
> Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
> Subject: RE: Testing H745 Regulators
> 
> > I always forget that the VAC is the RMS and not the peak-to-peak. I
> > will look for a minimum rating of 100V.
> 
> 600V bridge modules are often more cost effective, and more likely to be in
> stock. That's why I went with the Vishay part I used.
> 
> If you can't find what you need due to shortages, you can also use a Faston
> tab rectifier and solder wire legs to it.
> 
> Thanks,
> Jonathan



More information about the cctalk mailing list