AlphaServer 2100s available

[dave.g4ugm at gmail.com]

Folks,
Does no one fancy a go at this. Had zero interest...
Dave

> -----Original Message-----
> From: dave.g4ugm at gmail.com <dave.g4ugm at gmail.com>
> Sent: 04 April 2022 12:29
> To: 'General Discussion: On-Topic and Off-Topic Posts'
> <cctalk at classiccmp.org>
> Subject: RE: AlphaServer 2100s available
> 
> Folks,
> 
> I got one of these from Antonio. It has 4 x CPU boards in plus a few disk
> drives, but it does not want to power up. It did spin the fans up then shut
> down. . I now have a lot of other projects on the go, so if anyone would like it
> please let me know.
> Its in Manchester, England.  Replies off-list please.
> 
> Dave
> 
> > -----Original Message-----
> > From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Antonio
> > Carlini via cctalk
> > Sent: 21 July 2020 20:58
> > To: General Discussion: On-Topic and Off-Topic Posts
> > <cctalk at classiccmp.org>
> > Subject: AlphaServer 2100s available
> >
> > I have three AlphaServer 2100 systems in storage in the UK (Oxfordshire).
> > The storage, however, is due to be demolished (soon, but no fixed date).
> >
> >
> > I won't have room to store these three systems, so if anyone would be
> > interested in offering them a home, then please get in touch!
> >
> >
> > I can probably get some pictures in the next day or two.
> >
> >
> > These systems were SMP Alphas and could sport as many as 4 CPUs. I'm
> > not sure of the configuration of these systems but I can probably find
> > that out soon.
> >
> > They have not been run since ~2003 so they may be in need of some TLC.
> > OTOH they are not rusted to death so you have a chance of getting them
> > back to life.
> >
> >
> > Just so you know what you might be dealing with these systems are about:
> > 700mm H x 430mm W x 810mm L.
> >
> >
> > I can't find the weight in any of my references right now but they are
> > very heavy. Three people can move them up a slight slope with some
> > effort but you would not successfully lift it into a car (assuming
> > that it would fit). I'm planning to dismantle them to move them (i.e.
> > remove PSU/PSUs etc. until they are light enough to move). A tail-lift
> > would probably be the sane way to go (and is, indeed, how they got to
> > their current location.
> >
> >
> > I'm hoping that someone can step forward and offer one or more of
> > these machines a new home. Please contact me off-list (once you're
> > sure you understand what you are getting into :-)).
> >
> >
> > Antonio
> >
> >
> > --
> > Antonio Carlini
> > antonio at acarlini.com
>