DEC RF08/RS08 module placement info

[Mattis Lind]

Hello again.

Took pictures of the entire RF08/RS08 drawing in daylight:
https://drive.google.com/drive/folders/1-CD1D6Aok_OSpXzk0GaJhjwad0HreDhc

The paper size is rather big. I think 22 x 17 inch. I don’t have access to
such a big scanner unfortunately. Companies that do scanning charge around
two or three dollar per page here in Sweden. At least it is what I found
when checking quickly. Unless someone has access to a bigger scanner in the
Stockholm area i think this is the best I can do for now.

When looking at the schematics it quite interesting to see that DEC changed
logic symbols from what they used in the PDP-8 and PDP-9 schematics while
still using the older transistor modules rather than TTL in the RF08/RS08.
The schematics are dated around 1970.

/Mattis



fredag 30 april 2021 skrev Josh Dersch <derschjo at gmail.com>:

>
>
> On Fri, Apr 30, 2021 at 2:24 PM Mattis Lind <mattislind at gmail.com> wrote:
>
>> I did another check of the drawings and found a module list.
>>
>> Initially I was looking for something more graphic then I found this:
>>
>> https://imgur.com/a/hzmhwQ4
>>
>> Hope it helps.
>>
>> /Mattis
>>
>
> Thanks so much, both for the pictures of your RF/RS08 and of the
> engineering drawings, those will be extremely helpful.  I've never seen
> those drawings before, the module list you have is definitely not in the
> ones available on Bitsavers.
>
> - Josh
>
>