resistor packs for terminating SCSI bus inside Exabyte 8020
nw.johnson at ieee.org
Sat Feb 6 17:55:24 CST 2021
I agree. None on Digikey. The manual says 7-resistor 8 pin, which is
impossible if one resistor on each pin goes to 5V and the other to Vss,
but the sockets are actually 9-pin!
If Chuck can give me a definite part number I will be on the way. The
controller says it specifically supports an EXB 8200 so should be able
to make it work with a terminator!
Nigel Johnson, MSc., MIEEE, MCSE VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
Skype: TILBURY2591 nw.johnson at ieee.org
On 2021-02-06 6:28 p.m., Chuck Guzis via cctalk wrote:
> ...and if a 9 pin SIP, the part number would be 4609X-104-221/331L.
> They're a bit harder to find.
More information about the cctalk