Apple 3.5" drive issue

Tapley, Mark B. mark.tapley at swri.org
Wed Apr 21 08:35:22 CDT 2021


> On Apr 20, 2021, at 5:14 PM, Richard Cini via cctalk <cctalk at classiccmp.org> wrote:
> 
> [EXTERNAL EMAIL]
> 
> If you can hear the eject motor, you may want to inspect the eject gear. I know I’ve had to replace them on both of my //gs drives. They’re 3D printed and I think I found them on eBay or one of the 3D services. I forget. I do remember it was $15 for 2.
> 
> http://cini.classiccmp.org/
> Long Island S100 User’s Group
> 
> Get Outlook<https://aka.ms/qtex0l> for iOS
> 
> ________________________________
> From: cctalk <cctalk-bounces at classiccmp.org> on behalf of David Williams via cctalk <cctalk at classiccmp.org>
> Sent: Tuesday, April 20, 2021 5:56:13 PM
> To: CCTalk <cctalk at classiccmp.org>
> Subject: Apple 3.5" drive issue
> 
> Moved recently and finally have space to set up the collection and play
> with it. I've set up my Apple IIgs and a Macintosh Plus and in testing
> they are still working but while doing so I've noticed an issue with the
> 3.5" drives. I have an Apple Superdrive and 4 Apple 3.5 Drives on the
> IIgs and where they all work as far as reading and writing, only the
> Superdrive can actually eject the disks. The Mac Plus has the internal
> drive and an external Apple 800K drive, both of which work except not
> being able to eject disks either. So out of 7 drives, I have one that
> doesn't need a paperclip to eject the disk. Haven't opened them up to
> look at them yet, wanted to see if this is common and suggestions on
> possible causes to check.
> 
> Thanks.
> 
> David Williams
> www.trailingedge.com<http://www.trailingedge.com>

I have forgotten, is this the same drive type where the lubrication eventually turns gummy and needs to be cleaned off and replaced by something with the original, relatively low viscosity? I recall that being an issue with some 3.5” drives.
                                        - Mark



More information about the cctalk mailing list