Looking for video (or photos) depicting how to remove ASR 33 printer from keyboard

[D. Resor]

Correction, 10 Parts

Don Resor
N6KAW

-----Original Message-----
From: cctech <cctech-bounces at classiccmp.org> On Behalf Of D. Resor via cctech
Sent: Monday, April 12, 2021 10:08 PM
To: 'Bill Degnan' <billdegnan at gmail.com>; 'General Discussion: On-Topic Posts' <cctech at classiccmp.org>
Subject: RE: Looking for video (or photos) depicting how to remove ASR 33 printer from keyboard

This might be a start....

https://www.soemtron.org/teletypemanuals.html

Here also is a restoration set of videos....  It seems there are eight parts and this was uploaded recently.

ASR33 Restoration

https://youtu.be/pEzpYHb4p5w

Don Resor
N6KAW

-----Original Message-----
From: cctech <cctech-bounces at classiccmp.org> On Behalf Of Bill Degnan via cctech
Sent: Monday, April 12, 2021 5:24 PM
To: cctech <cctech at classiccmp.org>
Subject: Looking for video (or photos) depicting how to remove ASR 33 printer from keyboard

I am looking for a video or photos that show how one removes the printer from the keyboard safely on an ASR 33.  I need to get to the underside of the printer levers so I can re-align them.  I am getting incorrect characters when I type over half of the keys.  I can see that a few levers are out of whack or not seated correctly but I believe to get to them properly I need to put the printer on its side or under a lift to get to the underside.  I am nervous about detaching the "H" shaped gizmo that connects the keyboard to the printer.
Thanks
Bill