ISO: Keronix Omnibus 8K "E1" memory schematics / technical docs

[jim stephens]

Keronix was a medium sized operation making OEM core stacks and 
sometimes would take in the whole job and engineer the host board for 
their product.

i know there are Microdata and some other Orange County made minis with 
Keronix stacks I've seen.  I suspect unless some culprit such as myself 
who worked at the company saved the data and the like it vanished into 
the engineering archives of the company and down a rathole.  I don't 
know of much other for them.

Microdata also had Ampex approach the company and make full core boards 
for instance as well.  The market for core was haphazard at best.  And I 
don't know of any instance of cooperation to define any standards where 
documentation would have gone.

I hope you find something.

BTW I have a couple of 4K Micro 800 boards that I recall were Keronix.

thanks
jim

On 11/20/2020 6:18 PM, Josh Dersch via cctalk wrote:
> Hey all --
>
> Got a nice 8KW omnibus core memory board here, designated the "E1" from
> Keronix, that almost works except that bit 1 is off in the weeds
> somewhere.  Not a lot of information out there on Keronix hardware, anyone
> have any docs?  The board came with a sheet describing the addressing
> configuration, but that's it.
>
> Thanks as always,
> Josh
>