VT-320 interfacing

[retrojoe at stateoftheark.ca]

I built that one, thank you for the link.

Worked for a bit, then quit.

If I move the wires around, I can get it to come and go, so it seems to be
the old db9-F I used is garbage.

I ordered new ones, just waiting for them to arrive.

I'll send an update when I have a new connector.

Thanks!

-----Original Message-----
From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Mark J. Blair via
cctalk
Sent: Monday, November 9, 2020 7:28 PM
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: VT-320 interfacing



> On Nov 9, 2020, at 5:53 PM, Grant Taylor via cctalk
<cctalk at classiccmp.org> wrote:
> 
>> The VT320 only has the DEC-423 MMJ, no RS-232.
> 
> I /thought/ that Modified Modular Jack was simply a physical thing and
completely independent of Recommended Standard 232.

DECconnect (aka MMJ) interface uses RS-423 electrical signaling, but it is
compatible with RS-232 signaling aside from (I think) some reduced noise
immunity over long lines when not using differential receivers.

The official DEC H8571 DE9 to MMJ adapter is just a plain pinout adapter
which grounds the TX- and RX- signals and doesn't bother with differential
signaling. It drives DSR, CTS and CD on the PC-compatible end with DSR from
the MMJ interface. At the moment, one of our friends here has one for sale
on his Etsy store:

https://www.etsy.com/listing/875566987/dec-h8571-de9-to-mmj-terminal-serial

Here's a page with details, including the wiring of that H8571 adapter:

https://www.lammertbies.nl/comm/cable/dec-mmj#h71j


-- 
Mark J. Blair, NF6X <nf6x at nf6x.net>
https://www.nf6x.net/