Standard Engineering CAMAC crate controller with LSI-11
Jon Elson
elson at pico-systems.com
Mon Sep 30 21:38:55 CDT 2019
On 09/30/2019 09:17 PM, Adrian Stoness via cctalk wrote:
> just a box of boards or a system missing a memoru module?
>
OK, if you are not familiar with it, CAMAC is a standard for
data acquisition and control, that has 25-slot powered
crates. At the right edge, the last 2 slots are dedicated
as controller slots.
This was a 3-slot set that could be used as a programmable
controller for the CAMAC crate.
So, it has 3 CAMAC modules, one of which has the LSI11/2 in it.
But, since the LSI11/2 doesn't have memory on board, and the
other boards don't seem to have any memory, it seems
something is missing. I think there must have been a 4th
module that communicated by a ribbon cable across the
front. It may still be around here...
Jon
More information about the cctalk
mailing list