Key for IBM 9370 - 20

jim stephens jwsmail at jwsss.com
Tue Nov 26 20:43:35 CST 2019



On 11/26/2019 2:40 PM, Dennis Boone via cctalk wrote:
> For Chicago/ACE, cut depths from 1 to 8 respectively are:
> 0.0155" 0.0310" 0.0465" 0.0620" 0.0775" 0.093" 0.1085" 0.1240"
>
> For Fort/GEM, depths are numbered 0 to 7, but the measurements are the
> same as for Chicago/ACE.
>
> Looking into the end of the key, pin numbering is:
>
> Chicago: #1 at eleven o'clock, proceed counterclockwise to #7 at one
> o'clock.
I found another reference.  different numbers slightly.

https://www.lockpicking101.com/viewtopic.php?f=9&t=42870

There are a couple different numbering systems. The pin lengths are the 
same, but the number
given to that particular length is different. Fort Lock, such as the Gem 
and Apex locks go clockwise
if you are looking down the barrel of the key from the tip. The Chicago 
Ace style goes counter-clockwise.
Fort Lock numbers them from 1-8 while Chicago goes 0-7.

Fort Lock/Chicago Ace/Depth of cut
1----------0----------.016"
2----------1----------.032"
3----------2----------.048"
4----------3----------.064"
5----------4----------.080"
6----------5----------.096"
7----------6----------.112"
8----------7----------.128"

What I have measured so far.  This starts with the index up, first slot 
to the right, going CCW.

Index pin  meas value

                 depth


 1.

      .0460   3

 2.

      .0770   5

 3.

      .0770   5

 4.

      .1090   7

 5.

      .0460   3

 6.

      .0795   5

 7.

      .1080   7


Here are photos of the key.

https://imgur.com/a/yCPwaR0


--30--


More information about the cctalk mailing list