Quantum 2080 and 540 service manuals

[dwight]

Heads getting stuck on the ramp?
Maybe it has warn a groove in the plastic. It could be the bearings on the head assembly as well.
Dwight

________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Chuck Guzis via cctalk <cctalk at classiccmp.org>
Sent: Friday, November 15, 2019 12:29 PM
To: allison via cctalk <cctalk at classiccmp.org>
Subject: Re: Quantum 2080 and 540 service manuals

On 11/15/19 10:51 AM, allison via cctalk wrote:

> I must have about 15 maybe more of the D540s and have found them
> to be the fastest seeking of the MFM drives and also near unbreakable.
> The oldest is about 36 years old.  Use them in CP/M crates, DOS boxen,
> PDP-11s (with RQDX2/3 controllers) and  Local swap for net booted
> uVAX2000 and swap file disks on uVAXII (61K blocks is more than
> enough swap space) for VMS5.44.
>
> I've not had stiction problems... likely because I have spares!
> Its a Murphy's law thing.

The Q540 that gets used is mounted on its side in an old Mad Intelligent
Systems box with an XT clone inside.  I don't think it's stiction; the
drive spins up fine, but the initial seek fails until I cycle power a
couple of times or tap the side of the drive with a screwdriver handle.

It's of no real consequence; the contents are backed up and I have a
spare XT-IDE drive if needed.  The FH MFM drives that I've owned have
slowly failed; the FH ESDI and SCSI drives have, interestingly all
continued to work.

--Chuck