Repurposing cable for IBM Model M Keyboard

Electronics Plus sales at elecplus.com
Wed Nov 6 13:56:21 CST 2019


The keyboard end of the cord has an RJ12 (6p6c) connector with six pins, and
looking at the plug with the key up, and pin 1 on the left, pin 2 is Data,
pin 3 is Clock, pin 4 is +5v, and pin 5 is ground.

Found on https://geekhack.org/index.php?topic=82503.0

I tried to access the site listed, and it no longer connects, so I called
the guy. He took it down about 2 years ago because too many people tried to
hack the site.

-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Rob Jarratt
via cctalk
Sent: Wednesday, November 06, 2019 8:31 AM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Repurposing cable for IBM Model M Keyboard

I need a keyboard cable for my VAXmate. This uses an SDL connector on one
end and RJ11 on the other. Keyboard cables for the IBM Model M have SDL
connectors at one end and a PS/2 connector at the other. I bought one of
these cables with the intention of replacing the PS/2 connector with an
RJ11.

 

However, I now have a pang of conscience about hacking around with a
perfectly good cable, particularly if they are uncommon. How common are
these cables?

 

Regards

 

Rob


-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



More information about the cctalk mailing list