TU58FS

Richard Cini rich.cini at verizon.net
Thu May 23 15:40:31 CDT 2019


  
  
  
    
    	Yes you can. Basically you can boot an image and then prepare the volume on the hard drive and copy it over. I have a PDP11 page on my Classiccmp site that walks through it. There’s also a long thread on the VCFE forums about it. 
classiccmp.org/cini/pdp11.htm

    	
    	

    	Get Outlook for iOS
    
  




On Thu, May 23, 2019 at 4:36 PM -0400, "Rod Smallwood via cctalk" <cctalk at classiccmp.org> wrote:










Hi

     I am working on getting my KDJ11-E based system up.

I have a CQD220A and a SCSI hard drive installed and formatted.

A serial connection to a Raspberry Pi soon brought up the console on the 
PDP-11 using TU58FS.

Next will be a second serial line to allow TU58 emulation. SFSG

What is not clear is if I can get a bootable OS (RT, RSX or whatever)  
image onto the Hard Drive using TU58FS.

Any advice as to if and how this could be done would be greatly 
appreciated .

Rod Smallwood



-- 









More information about the cctalk mailing list