"industrial" PDP-11

[Noel Chiappa]

    > From: Jules Richardson

    > On 5/15/19 9:29 PM, Steve Malikoff via cctalk wrote:

    >> Here's the Industrial 11 version of the 11/05

There's an Industrial 11 version of the -11/70, too:

  http://ana-3.lcs.mit.edu/~jnc/tech/pdp11/consoles/1170IndustCenter.jpg

So the only one missing (of the early -11's) is the /45, but I wouldn't be
surprised if that existed too. I've no idea about the /20 (I don't think the
/20R counts), or the later machines without physical switch registers (/04,
/34, etc).

    > and /5 or /10, or in fact what the difference is between the two 
    > anyway, I'm not sure

The paint on the front console inlay (I'm not joking :-).

Other than the /15-/20 (which do have slight hardware differences), none of
the OEM/End-User pairs have hardware differences in the circuitry that I know
of (although the /35 was _usually_ supplied in a BA11-D 10-1/2" box, and the
/40 in the BA11-F 21" - and there are rare counter-examples to this rule).

	Noel