SCSI2SD on VMS 5.4

Dave Wade dave.g4ugm at gmail.com
Sat Mar 16 05:41:01 CDT 2019


Rob,

 Might be an issue with the card. The KZQSA was officially only supported
for CD-ROM and Tape.

http://www.microvax2.org/files/KZQSA%20Jumper%20Settings.htm

(towards the bottom)...
... have you tried with a real SCSI drive?

Dave

> -----Original Message-----
> From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Rob Jarratt via
> cctalk
> Sent: 16 March 2019 10:29
> To: General Discussion: On-Topic and Off-Topic Posts
> <cctalk at classiccmp.org>
> Subject: SCSI2SD on VMS 5.4
> 
> I have been experimenting with a SCSI21SD V6 card trying to get it to work
on
> a VAX 4000-200 running VMS 5.4 using a KZQSA. It seems to recognise that
> there is a SCSI device there, but any attempt to access the device from
VMS
> 5.4 results in a Fatal Drive Error. I tried booting a VMS 7.3 image from
the
> SCSI2SD card and that worked.
> 
> 
> 
> Obviously I have played with some of the settings, like SCSI2 mode etc,
but I
> have not found anything that works. Has anyone succeeded in getting this
> board to work on VMS 5.4?
> 
> 
> 
> Thanks
> 
> 
> 
> Rob




More information about the cctalk mailing list