DEC Purchase Specifications, particularly 23-000A9-01

[Bob Smith]

Don't know if you are aware of this data, might just give you some hints.
http://www.ak6dn.com/PDP-11/M9312/

On Tue, Jul 16, 2019 at 4:19 PM Bill Degnan via cctalk
<cctalk at classiccmp.org> wrote:
>
> On Tue, Jul 16, 2019 at 4:10 PM Mark J. Blair via cctalk <
> cctalk at classiccmp.org> wrote:
>
> > I've been studying scanned documents for the M9312 UNIBUS
> > bootstrap/terminator card because of reasons. They refer to Digital
> > Equipment Corporation Purchase Specifications 23-000A9-01 and 23-000F1-01
> > for the PROMs, and I'm wondering whether those documents have been
> > preserved anywhere? I'd love to see them.
> >
> > Ok, about the reasons: My PDP-11/34A has an M9301-YF bootstrap/terminator
> > card, which doesn't have bootstrap code for a couple of the newer devices
> > I'd like to use in the system such as RL02 and emulated TU58. The newer
> > M9312 card looks more flexible for changing out bootstraps than the M9301
> > series.
> >
> > I'm working on getting my hands on an M9312, but I don't know yet whether
> > I'll be able to get original PROMs for the specific bootstraps that I want.
> > I haven't identified a trustworthy source for blank old-timey bipolar PROMs
> > yet (and I'm not sure if I have a suitable device programmer for them), and
> > I was thinking about making some sort of PROM emulations that I can swap
> > around like they're going out of style. It would probably be helpful (and
> > definitely interesting) if I could learn details about the original part
> > specifications, such as what speed ratings DEC used. I don't have an M9312
> > in my hands yet, and I'm not yet sure about how rapidly the card performs
> > its little 4-to-16 bit deserialization stunt.
> >
> > If 70ns access time parts are sufficient for the M9312's PROMs, then I may
> > design an emulation with a 5V compatible 28 series EEPROM. If they need to
> > be faster, then I may need to do something fancier. Or maybe I'll find the
> > original PROMs that I need and then get distracted and wander off. It may
> > well be easier to design a replacement for the entire M9312 card than
> > trying to emulate the individual 512x4 bipolar PROMs, but since when do I
> > do anything the easy way? I sure wouldn't be playing with 40 year old
> > computers if I was concerned with practicality and ease of use!
> >
> > --
> > Mark J. Blair, NF6X <nf6x at nf6x.net>
> > http://www.nf6x.net/
>
>
> Mark,
> This guy makes them
> https://www.ebay.com/itm/DEC-PDP-11-Boot-Prom-M9312-RL02-RX01-RX02-RK06-07-nach-Wunsch/192564377085
>
> He may be able to advise answers to your questions if you find the price it
> too high.
>
> Bill