early PDP-11/45 info sought
Jay Jaeger
cube1 at charter.net
Sun Jan 27 21:07:25 CST 2019
I think I can help some. I have a PDP-11/45 From U. Wisc. ECE that
claims to be S/N 1525 .
* I do NOT have an actual wire list, it seems, but I will hunt a bit
more tomorrow or Tuesday.
* I DO have earlier PDP-11/45 CPU drawings, but no ECO info
Here is what I have for drawings:
B-DD-11/45-0-AJ Basic Assy (PDP11/45) 5/72 [Not CPU Cards]
D-CS-5409684-0-1-H 11/45 Console Board 3/72
B-DD-KB11-A-0-AA 16 Bit Processor May-72 [NOT CPU HERE]
B-DD-DL11-0-K
B-DD-KW11-0-*
B-DD-BM873-0-F
B-DD-KT11-C-B
D-IC-11/45-0-1-H Power System Configuration
K-WL-7009540-0-2 Wire List (small - only 6 pages)
B-DD-861-0-L
B-DD-H7420-0-E
B-DD-H744-0-R
B-DD-H745-0-R
B-DD-H746-0-E
E-CS-H754-0-1-T
A-AL-11/45-0-3-B Accessory List
D-AR-11/45-0-4-C (Rack Configurations)
C-PL-11/45-0-4-D Arrangement Parts List
B-DD-M9301-0-D
B-DD-KT11-C-B
[NOTE: Use KT11-C Only with KB11-A & FP11-B,
Use KT11-CD Only with KB11-D & FP11-C]
[M8107, M8108]
KB11-A Engineering Drawings [PDP-11/45 CPU]
KB11-A-0-AA Dated May 72
[M8100, M8101, M8102, M8103, ROM Control Listings for M8103,
M8104, M8105, M8106, M8109, M8116, M930, M9202]
NO wire list
(Curiously, I also have KB11-C, 11/70 drawings.)
B-DD-MF11-U-B 16K Core [M8293, G235, G114, H217, M7259 (Parity Control)]
B-DD-MS11-B-B MOS Memory [M8110, G401]
B-DD-MS11-C-B Bipolar Memory [M8110, M8111]
B-DD-MS11-C-C Bipolar Memory (ECO MS11C-00003) Mentions M8120
B-DD-FB11-0-A FP11-B Floating Point Processor March 72
[M8114, M8115, M8112, M8812 ROM Control Listings, M8813]
B-TC-FP11-C-6 FP11-C (Print Set MP00038) December 75
[M8126, M8127, M8128, M8129]
DEC-11-HFPAA-C-D FP11 Floating Point Processor Maintenance Manual
DEC-11-FP11C-MM-001 FP11-C Floating Point Processor Maintenance Manual
EK-KT11C-MM-005 KT11-C, CD Memory Management Unit Maintenance Manual
EK-MS11A-MM-006 MS11-A,B,C memory System Maintenance Manual
PDP-11 Systems Course Training Drawings
PDP-11/45, 11/70 Maintenance Course handout book
And some diagnostic listings for the 11/40 and 11/45.
I have not looked through my fiche for ECO info, though I am not
hopeful, but will look tomorrow. Most of my fiche are too modern.
Let me know what you want me to scan - should be able to get to it later
this week.
JRJ
On 1/27/2019 6:40 PM, Fritz Mueller via cctalk wrote:
> Those reading through the recent "PDP-11/45 RSTS/E boot problem" thread here will know that I've gotten to some corners of my 11/45 CPU now that don't match up with the commonly available engineering drawings.
>
> My /45 is an early serial number (#152). So far I've verified hardware differences on at least my M8100 and M8105 cards and spares, relating to parity error abort handling. I would really like to track down any of the following resources:
>
> - PDP 11/45 system engineering drawings *earlier* than those currently available on bitsavers (Jun '74)
>
> - Any PDP 11/45 backplane wire list (what looks to be a wire list in the currently available engineering drawings is actually only a breakdown of the power harness.)
>
> - PDP 11/45 ECO information, particularly the following:
>
> M8100 00003
> M8103 00005
> M8105 00005
> M8106 00007, 00008, 00012, 00012A
> M8110 00008
>
> KB11-A 00015
>
> Bitsavers seems to have a DEC-O-LOG for M8105, but this does not contain specifics on cuts and jumps for ECO 00005, referring only to the associated "kit". DEC-O-LOGs for the other processor boards are missing.
>
> If anybody thinks they might have any of this info squirreled away anywhere, I'd really love to find out more about it!
>
> Parts of the ECO's are pretty easy to figure, just by comparing the state of my existing boards to the '74 drawings. But other parts not so much...
>
> thanks much,
> --FritzM.
>
>
>
More information about the cctalk
mailing list