Identification of an HP minicomputer

[ED SHARPE]

behind front panel is memory..... Ed#     ps  back is  io
In a message dated 8/12/2019 3:21:20 PM US Mountain Standard Time, cctalk at classiccmp.org writes:

Perhaps these will help? 
https://www.hpmuseum.net/exhibit.php?hwimg=108 
http://www.datormuseum.se/computers/hewlett-packard/hp-21mx 


From: "Guy Sotomayor Jr" <ggs at shiresoft.com> 
To: "myself" <turing at shaw.ca>, "cctalk" <cctalk at classiccmp.org> 
Sent: Monday, August 12, 2019 3:04:31 PM 
Subject: Re: Identification of an HP minicomputer 

It’s a 9-slot variant that says HP-1000 M-Series on the front panel. From what I can tell the front panel appears to be the same as any of the other HP-1000 series. 

What I’m trying to figure out is what the actual CPU configuration is without disassembly (which I still need to figure out) so that I can actually examine the boards. 

Thanks. 

TTFN - Guy 

> On Aug 12, 2019, at 2:59 PM, Norman Jaffe via cctalk <cctalk at classiccmp.org> wrote: 
> 
> Can you provide a picture of the front panel? 
> 2113 implies a 21MX-E; the nine-slot version is a 2109 while the fourteen-slot would be a 2113. 
> This might help - https://www.hpmuseum.net/display_item.php?hw=109 . 
> 
> From: "cctalk" <cctalk at classiccmp.org> 
> To: "cctalk" <cctalk at classiccmp.org> 
> Sent: Monday, August 12, 2019 2:52:18 PM 
> Subject: Identification of an HP minicomputer 
> 
> Hi, 
> 
> I have sitting in my pile of stuff an HP minicomputer that I’m trying to identify (at least in terms of exactly what it is and what sort of configuration it might have). 
> 
> As far as I can tell, it’s an HP-1000 M-Series minicomputer (that should hopefully get us *some* details). The “asset tag” lists the part number as 2113023-108. Looking at the back there’s space for 9 I/O cards (5 are occupied). 
> 
> So my question is which of the several CPUs could this be and how do I tell (for example) what the configuration is (e.g. how much memory, etc). 
> 
> Yes, I have looked on bitsavers, but short of disassembling the box to look at the (at least) 2 boards that are below the I/O slots, I can’t tell what’s there and I’d like to see if there’s a way to determine what this is without resorting to disassembly. 
> 
> Thanks. 
> 
> TTFN - Guy