DEC PDP-11/70 cabinet setup

[Noel Chiappa]

    > From: Nigel Williams

    > I'm wondering if on a real 11/70 there is a 5mm gap between the
    > masthead and the rack blanking panel below it? 

If by "masthead" you mean the thing DEC calls a "Logo Panel" (see 11/70
Engineering Drawings, 'Unit Assembly', pg 1 of 5), it's the same as all the
other PDP-11 etc logo panels, the -11/70 just has an inlay (thin metal sheet)
which is painted differently.

And yes, there's a 5mm gap between the top of the top 10-1/2" blank panel, and
the bottom edge of the logo panel.

	Noel