Identifying TO-3 w/HP house numbering

[Curious Marc]

Yay! Congrats Josh!
Marc

> On Oct 16, 2018, at 8:39 PM, Josh Dersch via cctalk <cctalk at classiccmp.org> wrote:
> 
>> On Tue, Oct 16, 2018 at 11:19 AM Josh Dersch <derschjo at gmail.com> wrote:
>> 
>> Thanks, all, for the responses!  The way it measures out makes it look
>> like it may be an MJ10006 or similar.  I think it's probably ok.
>> 
>> I poked around a bit more this morning and it's looking like part of the
>> flyback is shorted out -- we have a 2382 at the museum and I popped it open
>> just now and I verified that it measures differently (i.e "not shorted" :))
>> at the same points.  So that's likely my problem.  Drat.
>> 
>> - Josh
>> 
> 
> And I was wrong -- the flyback's fine (yay!).  Found a nearby 0.015uF, 400V
> film capacitor that was shorted.  Replaced it and now I have video!  It's a
> bit dim, it's too wide, and gets wider as it warms up but it's a start :).
> 
> Thanks again,
> Josh