Source code listings from REDAC PDP-based PCB layout system.

Randy Dawson rdawson16 at hotmail.com
Mon Oct 1 18:09:45 CDT 2018


I think this is Racal-Readac, one of the early PCB software vendors (from the UK).
Later bought up by Zunken (the big three are Cadence, Mentor, Zunken).

Is the source straight PDP-15 assembly, or a mix with another high level language?

It would be great to look at this, I hope it makes it to bitsavers...

Randy
________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Al Kossow via cctalk <cctalk at classiccmp.org>
Sent: Monday, October 1, 2018 3:17 PM
To: cctalk at classiccmp.org
Subject: Re: Source code listings from REDAC PDP-based PCB layout system.

I'm interested.
PDP-15 software in any form is pretty rare

On 10/1/18 7:33 AM, Mattis Lind via cctalk wrote:
> I have a set of around 5 to 8 binders with printed source code listings
> from a PDP-15 system. The listings appear to be from a REDAC SOFTWARE
> LIMITED PCB CAD system. The name of the software seems to be REDAL 3 MARK
> 7. There are dates on the listings in the range 74 and 75.
>
> https://i.imgur.com/m1ji9uR.jpg
> https://i.imgur.com/SzaiH78.jpg
>
> First of all does anyone has more info on the REDAL software from REDAC?
>
> Then secondly is there anyone interested in these binders with listings? I
> think the quality of printout is good enough to do OCR on.
>
> Note that there is no guarantee that these are the complete set of binders
> with listings.
>
> /Mattis
>



More information about the cctalk mailing list