PDP8/e programmers consoles

[Ed Sharpe]

back in the day (70s)  when selling these  things  2ed  hand   E  was ind.   M and F were always  LED... I  preferred the  leds  Ed#
 
 
In a message dated 3/16/2018 7:31:26 PM US Mountain Standard Time, cctalk at classiccmp.org writes:

 
 On Fri, Mar 16, 2018, 20:58 allison via cctalk <cctalk at classiccmp.org>
wrote:

> On 03/16/2018 08:28 PM, Charles Dickman via cctalk wrote:
> > So the PDP8/e used the KC8-EA programmers console which has
> > incandescent indicator lamps and the PDP8/f used the KC8-FL
> > programmers console which has LED indicator lamps.
> Wrong. The 8f uses the same as the 8e. It was the 8m that had the
> LED console. If memory serves it was date of design that influenced it.
>

I have seen several 8/f systems that have LEDs, for what it's worth. I can
only imagine DEC was transitioning the 8/m and 8/f to take LEDs instead of
incandescents.

>
> I can be certain as I have an 8f built in 1973. I've since moded it to
> take bright yellow LEDs as lamps are not easy to find and annoying
> to replace. If I care to I can put the lamps back. Since I put
> operational
> over absolute faithful its better as is, less digging in the box.
>

The bulbs are still available on Mouser. I've ordered a bunch for my 8/e
and have been very happy with them.

http://so-much-stuff.com/pdp8/repair/bulbs.php

>
> However its possible to swap the panels, I tried it once and it pass diags
> and worked fine. Didn't like the red.
>

I've found that my LED 8/m is very hard to read, as the LEDs are very dim.

>
> >
> > Another console question...
> >
> > Has anyone ever seen a PDP8/i style console for the PDP8/e? Looking at
> > the way the PDP8/e console functions, it should be possible to time
> > multiplex all the register to the data bus so they are all visible at
> > once when the machine is halted.
> No and can't! The 8i (nor the 8L) was not omnibus.
>

I think he's aware (hence "style").

Kyle

>