Restoring a PC Server 500 P/390

Jay Jaeger cube1 at charter.net
Mon Jun 4 12:38:55 CDT 2018


On 5/26/2018 3:15 PM, Dave Wade via cctech wrote:
> Folks,            
> 
>  
> 
> Well in case any one has the slightest bit of interest, I have now plugged
> the RAID card back in and after replacing on of the drive carriers I can get
> five of the six drives to spin up. Its now copying stuff to my Buffalo NAS
> but as its 10Mbit LAN its not terribly fast. I think the NAS isn't very fast
> either. It looks like zipping up the files and FTPing the ZIP files might be
> the quickest way to go.
> 
>  
> 
> Dave
> 
>  
> 
> From: Dave Wade <dave.g4ugm at gmail.com> 
> Sent: 18 May 2018 22:31
> To: 'Benjamin Huntsman' <BHuntsman at mail2.cu-portland.edu>; 'General
> Discussion: On-Topic and Off-Topic Posts' <cctalk at classiccmp.org>
> Subject: RE: Restoring a PC Server 500 P/390
> 
>  
> 
> I thought I had captioned that picture. It's the original RAID controller
> which I am not using. If I plug it in it starts the disks in the RAID array
> which takes ages, and steals the hard disk BIOS vector which I need for the
> SCSI card that's running the system.
> 
> I didn't want to remove it fully as I need to label the cables feeding it.
> One feeds the top drive bays, and the other the bottom so if I ever need to
> put it back it I need to know which is which. 
> 
> If I get some free time I will have a go at starting the disks in it and
> repairing the RAID array, and perhaps copy the disks that are installed.
> 
>  
> 
> Dave
> 
>  
> 
>  
> 
> From: Benjamin Huntsman <BHuntsman at mail2.cu-portland.edu
> <mailto:BHuntsman at mail2.cu-portland.edu> > 
> Sent: 18 May 2018 21:49
> To: Dave Wade <dave.g4ugm at gmail.com <mailto:dave.g4ugm at gmail.com> >; General
> Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org
> <mailto:cctalk at classiccmp.org> >
> Subject: Re: Restoring a PC Server 500 P/390
> 
>  
> 
> I gotta ask, what's the deal with the dangling card?  That cracked me up!
> 
>  
> 
> Thanks for posting some pics!
> 
>  
> 
>   _____  
> 
> From: cctalk <cctalk-bounces at classiccmp.org
> <mailto:cctalk-bounces at classiccmp.org> > on behalf of Dave Wade via cctalk
> <cctalk at classiccmp.org <mailto:cctalk at classiccmp.org> >
> Sent: Friday, May 18, 2018 1:46 PM
> To: 'Guy Sotomayor Jr'; 'General Discussion: On-Topic and Off-Topic Posts'
> Subject: RE: Restoring a PC Server 500 P/390 
> 
>  
> 
> 
> 
>> -----Original Message-----
>> From: Guy Sotomayor Jr <ggs at shiresoft.com <mailto:ggs at shiresoft.com> >
>> Sent: 15 May 2018 21:39
>> To: Dave Wade <dave.g4ugm at gmail.com <mailto:dave.g4ugm at gmail.com> >;
> General Discussion: On-Topic
>> and Off-Topic Posts <cctalk at classiccmp.org <mailto:cctalk at classiccmp.org>
>>
>> Subject: Re: Restoring a PC Server 500 P/390
>>
>>
>>
>>> On May 15, 2018, at 1:29 PM, Dave Wade via cctalk <cctalk at classiccmp.org
> <mailto:cctalk at classiccmp.org> >
>> wrote:
>>>
>>>
>>> That's, in effect, what I did. Whilst there were Microchannel IDE
> Controllers
>> I have never seen one. There are no IDE interfaces on the "Planar" so
> every
>> thing must be on the MCA bus.
>>> So I bought a BusLogic BT646 SCSI card on E-Bay. I also bought an
> Adaptec
>> card as a spare.  I think I struck lucky with the BT646. It is a simple
> SCSI/2 card,
>> no raid but it does have a BIOS with support for two bootable drives and a
>>> 4GB drive option.
>>> OS/2 has drivers for it so it works out of the box. The OS/2 boot disks
> find
>> the drive and install the proper drivers.
>>> To compensate for the slower "narrow" drives I bought a SCSI2SD card
> that
>> puts an SD card on the bus. OS/2 just sees it as a up two four drives
>> depending on how I configure it. At present I have two 4gb drives. The
> card
>> in it is 32gb so I can add 2 x 12gb drives or 1 x 24gb or some other mix.
> The CD
>> ROM sites on the same bus. I haven't tried the tape drive yet..
>>>
>>
> 
> 
> Well I found an XGA2 card in the pile of bits so now I have 1024x768 display
> resolution. I have swapped the CDROM for a SCSI DVD drive. 
> 
> I managed to boot MTS and there are a few pics here:-
> 
> https://flic.kr/s/aHsmc1pkB1 
> 
> 
>  <https://flic.kr/s/aHsmc1pkB1> 
> 
>  <https://flic.kr/s/aHsmc1pkB1> P390
> 
> flic.kr
> 
> Explore this photo album by Dave G4UGM on Flickr!
> 
> 
> 
> 
> next job is to tidy up and re-assemble the case..
> 
> Dave
> 
>> Some time ago I acquired a PCI P/390 card (along with the various LIC
> files).  I
>> went down the same path as you to build a P/390 system with OS/2 but I
>> kept running into problems with OS/2 versions and supported hardware.
>>
>> I finally gave up and acquired a PCI based RS/6000 that I'll install AIX
> on and
>> have an R/390.  ;-)  I haven't had the time yet to make any progress on
> it.
>>
>> But it's good to know that you've managed to do this if I decide to go
> back
>> and attempt the PC route again.
>>
>> TTFN - Guy
> 
> 

I used Clonezilla to make an image of my PCI machien with a P/390E card
to a USB drive - but in your case that would, of course, require it to
recognize your RAID array (which it just might, if the BIOS recognizes it).


More information about the cctalk mailing list