Adaptec 1522A SCSI Support (was re: New TestFDC Results Registry)

[Jason T]

On Thu, Jan 18, 2018 at 7:55 PM, Richard Cini <rich.cini at verizon.net> wrote:
> I use this card as a floppy/disk controller in a PC/AT that's used solely for imaging. The controller is connected to two Seagate ST-2502N (442MB) hard drives running MS-DOS 6.22. Works like a champ. Cables are readily available on eBay but since they're regular 50-pin IDC connectors, you can DIY if needed -- connectors are readily available.

Do you have (and can you post) the MS-DOS drivers for that card?  I
also run one in my floppy imager machine, which dual-boots btw. MS-DOS
and some later Linux.  Having SCSI for at least one of the OSes would
be nice.

I could also switch the other partition over to FreeBSD, as Warner L suggested.