help id a chip

[Mike Stein]

The L & TC series (among others?) used a number of those chips; I *might* even be able to look up what it did but I doubt that it'd be useful information ;-)

m

----- Original Message ----- 
From: "Pete Lancashire via cctech" <cctech at classiccmp.org>
To: "william degnan" <billdegnan at gmail.com>; "General Discussion: On-Topic Posts" <cctech at classiccmp.org>
Sent: Wednesday, January 17, 2018 1:19 PM
Subject: Re: help id a chip


> Burroughs
> 
> One has to love the 1/8" spacing.
> 
> I have a box of them from when I worked there. I may even have one of the
> very rare test sockets.
> 
> The division I was in was considering using the technology. I can't
> remember what actually used them. Way too long ago.
> The plant I was in built the B7xx family.
> 
> I
> 
> -pete
> 
> On Wed, Jan 17, 2018 at 10:05 AM, william degnan via cctech <
> cctech at classiccmp.org> wrote:
> 
>> Can someone tell me what chip this is?
>>
>> http://vintagecomputer.net/pictures/2017/Objects/P1010114.JPG
>> http://vintagecomputer.net/pictures/2017/Objects/P1010093.JPG
>> http://vintagecomputer.net/pictures/2017/Objects/P1010094.JPG
>>
>> (note ..94/94 show the item in a sealed in storage material)
>>
>> the underside consists of 4 sets of 12 pins plus the corner 3 pins, as
>> shown on the top of the chip.
>>
>> thanks
>>
>>