Digilog DLM III?

W2HX w2hx at w2hx.com
Mon Apr 23 19:54:16 CDT 2018

Small world!

-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of systems_glitch via cctalk
Sent: Monday, April 23, 2018 7:34 AM
To: Ethan Dicks; General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Digilog DLM III?

I've got one as well, not sure if it's the same revision or not. Mine may have come with a manual, I thought it had been folded up inside the front cover but I just checked and it's not -- the lot of equipment it came with included many Rubbermaid tubs full of documentation, so it's possibly somewhere in there.


On Sat, Apr 21, 2018 at 12:07 AM, Ethan Dicks via cctalk < cctalk at classiccmp.org> wrote:

> On Fri, Apr 20, 2018 at 11:21 PM, W2HX via cctalk 
> <cctalk at classiccmp.org>
> wrote:
> > Hi friends. Looking for a user manual (or anything) for this data 
> > line
> monitor.  Here is a picture:
> >
> > http://w2hx.com/x/Digilog/Digilog-DLM-III.jpg
> I have one of those (rescued from Software Results Corp. 25 years 
> ago).  And astoundingly, the Operator Manual was stored right on top.
> About 60 single-sided pages.  It's not an original manual.  It's 
> already a Xerox copy but it appears to be in fair shape, not too much 
> copy fade.  I can see about scanning it this week.
> I didn't see a copy of the manual online anywhere, but I did find 
> several mentions in Computerworld, like this one from 11 Oct 1982 
> announcing a price cut on the DLM III from $3775 to $2995.
> https://books.google.com/books?id=LW9X-GFY68sC&pg=PA64&lpg=PA64
> -ethan

More information about the cctalk mailing list