Windows 1.0 For DEC Rainbow (mirror of Latrobe ftp anybody ?)

william degnan billdegnan at gmail.com
Thu May 4 21:18:07 CDT 2017


OK..  I will use LCTERM on my Rainbow to Kermit to my Raspberry Pi.
b

On Thu, May 4, 2017 at 9:58 PM, Fred Cisin via cctalk <cctalk at classiccmp.org
> wrote:

> On Thu, 4 May 2017, Warner Losh via cctalk wrote:
>
>> The old fashioned way: copy the files on the rainbow to the hard
>> drive, kermit to my unix box.
>> I have a kryoflux, but it's being nothing but frustrating to me since
>> I don't know if I have a known good floppy it supports or not. I mean
>> I have two 5.25 1.2M floppy drives, just have no way of knowing if
>> they are good or not and am loathe to try to buy another one...  So
>> I'm reading them the only way I know how: via an RX-50 on my
>> Rainbow...
>>
>
> Rainbow disks are readable on a PC with 1.2M.  But, it's sometimes a
> little easier if you use a 720K 5.25" drive.
>
> 96tpi, 300 RPM with 250K data transfer rate
> (or, with some 1.2M drives: 360RPM with 300K data transfer rate, but NOT
> double stepping as would be done for 360K disk at that data transfer rate)
>
>
> There are commercial programs available for the PC to read/write Rainbow,
> and even programs for the Rainbow to read/write PC 160K/180K disks.
> (for writing PC on the Rainbow, start with a virgin disk, and format it on
> the Rainbow in PC format, or in a PC using a 1.2M drive in 190K format
> -same track width problems as rewriting 360K disks in 1.2M drive)
>


More information about the cctalk mailing list