Soldapullt original vs III

Chuck Guzis cclist at sydex.com
Mon Jan 16 14:06:06 CST 2017


On 01/16/2017 11:26 AM, Brian Walenz wrote:

> I've also started reflowing and adding fresh solder before attempting
> to desolder.  Could be better heat transfer, or just easier to suck
> up a larger blob.

On a veneered and generated board like one from a PDP-8, I'd probably
use a fusible alloy, such as Chip-Quik and avoid elevated temperatures
altogether.

--Chuck



More information about the cctalk mailing list