Cleaning RK05 packs (Was: LGP-30 Memory Drum Update)

[Tony Duell]

> Another thing to watch out for is the two halves of some if not all
> were screwed together with self tapping screws. When you take
> them apart bit of plastic may come out of the holes or fall off the
> insides of the screw threads. That plastic if gets between the platter
> and head will not be to the heads advantage.

I seem to recall that one of the RK05 manuals warned that when re-fitting
said screws you should always put them in, turn them anticlockwise
until the threads engage and then tighten them clockwise. Just
screwing them in not only risks (as ever) stripping the thread in the
plastic housing, but also the action of cutting the new thread may
cause bits of plastic to break loose and they might (will!) end up
where they shouldn't

-tony