DEC indicator panel mounting details

jim stephens jwsmail at jwsss.com
Tue Dec 19 16:48:48 CST 2017



On 12/19/2017 2:36 PM, Josh Dersch via cctalk wrote:
> On Tue, Dec 19, 2017 at 2:25 PM, Josh Dersch <derschjo at gmail.com> wrote:
>
>> On Tue, Dec 19, 2017 at 2:15 PM, Al Kossow via cctalk <
>> cctalk at classiccmp.org> wrote:
>>
>>>
>>> On 12/19/17 10:49 AM, Noel Chiappa via cctalk wrote:
>>>
>>>> Could someone who has one please take a look and let us know (or, even
>>> better,
>>>> send us photos)?
>>>
>>> If someone can't get to mounted ones, I can trundle over to CHM artifact
>>> storage
>>> and look at one of our racks.
>>>
>>> I would think LCM should have some readily accessable, though.
>>>
>>>
>>>
>> I will see if I can grab some pictures this afternoon. We have a few
>> cabinets that I can take a close look at the innards of.
>>
>> - Josh
>>
>>
>>
> See the pictures at the below link:
>
> https://1drv.ms/f/s!Aqb36sqnCIfMotpQIuc2-tDUva3iBw
>
> It looks to be fairly straightforward; the plastic "ball on post" brackets
> are mounted to the rack rails, and there are metal brackets that screw into
> the BOP brackets that hold the PCB/lamp assembly.
>
> Hope this is the right assembly for you, if not, or if you have questions,
> let me know and I can try to fill in the holes...
>
> - Josh
>
>
I am not sure if it is what you need, but Vince S did some 3d print STL 
files for some of the ball mounting gizmos.

http://so-much-stuff.com/pdp8/cad/3d.php

thanks
Jim



More information about the cctalk mailing list