Remex Tape Reader - Pre-power up advice?
Anders Nelson
anders.k.nelson at gmail.com
Sun Apr 16 16:45:15 CDT 2017
Thanks for the tips, I think I'll replace the caps first as I don't own a
variac. I'd rather not damage anything in case the foil in those caps have
shorted upon application of full power.
=]
--
Anders Nelson
+1 (517) 775-6129
www.erogear.com
On Sun, Apr 16, 2017 at 12:02 PM, Pete Lancashire <pete at petelancashire.com>
wrote:
> I would first be more concerned with the ones I've circled
>
> https://goo.gl/photos/jweLs4meE2to3mom8
>
> Guessing this guy was built > 30-40 years ago. If it was mine I would
> replace all the smaller ones.
>
> Get it over and done with.
>
> The ones that have screws, you can take the chance of putting a scope
> across them (watch out if they are floating !!) and look at the ripple, I
> any over say 2%, they are more than likely bad, but you can see if the
> reform or not. More then a couple % and you can damage things.
>
> Other things I do
>
> Check the voltages quickly
>
> Check the thermal grease on all the heat sinks.
>
> -pete
>
> PS keep your eyes open from replacement lamps.
>
>
>
>
>
>
> On Sun, Apr 16, 2017 at 11:28 AM, Anders Nelson via cctalk <
> cctalk at classiccmp.org> wrote:
>
>> Hi guys,
>>
>> I recently impulse-bought a paper tape reader from eBay, a Remex
>> RRS6500BE1/660/DRB/U901
>>
>> Link: http://www.ebay.com/itm/292050475397
>>
>> Pictures: https://goo.gl/photos/Wa3W7mtTwwuTczUV7
>>
>> It has several enormous capacitors in it and I want to do my due diligence
>> before powering it up. Does anyone have advice in this regard? I'm
>> competent in soldering and rework of all sorts but definitely more in
>> digital than analog.
>>
>> Also the spindles squeak very slightly - are they oilable?
>>
>> In general it looks to be in pristine condition; no dust and no
>> magic-smoke
>> smell. The only repair item I can find is a sticking tape roller and
>> gentle
>> bending oughta solve that.
>>
>> I await your thoughts!
>> --
>> Anders Nelson
>>
>> +1 (517) 775-6129
>>
>> www.erogear.com
>>
>>
>
More information about the cctalk
mailing list