Olivetti M24 Mounting Bushes for Bus Converter

Fred Cisin cisin at xenosoft.com
Fri Mar 25 17:24:21 CDT 2016


Sorry for top posting, . . .

Does what you just forwarded look blank to you?

Search it for:
"I have posted the pictures here:"
ending with
"Regards
Rob"



On Fri, 25 Mar 2016, dwight wrote:

> Rob, many of your messages are blank.
> Dwight
>
> ________________________________________
> From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Robert Jarratt <robert.jarratt at ntlworld.com>
> Sent: Friday, March 25, 2016 2:25 PM
> To: 'General Discussion: On-Topic and Off-Topic Posts'
> Subject: RE: Olivetti M24 Mounting Bushes for Bus Converter
>
>> -----Original Message-----
>> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Fred
> Cisin
>> Sent: 25 March 2016 19:10
>> To: General Discussion: On-Topic and Off-Topic Posts
>> <cctalk at classiccmp.org>
>> Subject: RE: Olivetti M24 Mounting Bushes for Bus Converter
>>
>>> I looked up rivnuts and they certainly look similar. They are
>>> definitely not standoffs though. I shall look closer at rivnuts.
>>
>> also look at nutserts.
>>
>> Riv-nuts are pop-rivets with a threaded center.  Usable through sheet
> metal,
>> and into blind holes (very carefully) Nutserts call for drilling and
> threading a
>> hole and screwing them in.
>>
>> I'm assuming that you are talking about threaded inserts in a plastic
> piece?
>>
>
> I have posted the pictures here:
> https://onedrive.live.com/redir?resid=FC758A5A91B91301!5776&authkey=!AOs6cfg
> 8p_qyB5Q&ithint=folder%2cjpg
>
> The pictures show three things:
>
> 1. The square holes that the mountings go into.
> 2. The top and bottom side of the steel mountings.
> 3. The top and bottom sides of the nylon (?) mountings.
>
> I find myself to really need the steel mountings to be able to mount the bus
> converter, I am hopeful that I can move a couple of existing nylon ones.
>
> Regards
>
> Rob


More information about the cctalk mailing list