PDP-8/a parts, 8 inch CDC floppy drives, 5.25 inch FH Tandon drives, TI SilentWriter, DECprinter I, LA30

[Paul Anderson]

I have M8315s, M8316, M8317, M8357s (RX8-E), etc if anyone needs any to go
with the boxes.

Paul

On Sat, Mar 19, 2016 at 12:12 PM, Mattis Lind <mattislind at gmail.com> wrote:

> I saw that there were a post on PDP-8/a systems (and parts).
>
> I have a few 8A100 chassis. These are H9300 with a G8016 regulator board.
> No CPU, no memory, no frontpanels. Just the H9300 chassis including the 10
> slot backplane, the 50Hz transformer assembly and the G8016 MOS memory
> regulator.
>
> BTW. The backup batteries are probably not in good shape any longer.
> Nothing is tested so capacitors etc might need checking.
>
> There are also some G8018 regulators, 50 Hz transformers for
> 8A400/8A600/8A800 boxes, 50 Hz transformers for 8A420/8A620/8A820 boxes
> (these are really very heavy).
>
>
> Then there are two CDC / IMI floppy drives. BR8A5D. Single sided. 8 inch.
> http://i.imgur.com/cMp76YA.jpg
> http://i.imgur.com/EA91ayu.jpg
> http://i.imgur.com/pWpmdX6.jpg
> http://i.imgur.com/eP3m06n.jpg
>
> They are in the original box. Not sure if these are new or not. They look
> fine. But haven't tested them. I might be able to test if there are
> interest.
>
> Then two Tandon TM100-3 Single sided 80 tracks  / 96 TPI drives. Tested
> working.
> http://i.imgur.com/UOnHNNI.jpg
> http://i.imgur.com/F4ypilz.jpg
>
> We have one too many of TI SlientWriters. I have no picture of it
> currently. But is som 7XX model I think. Printing on thermo paper.
> Interest?
>
> We have a few DECprinter I aka LA180. A manual can be included as well...
>
> And since we got one LA30 working just fine, we don't need another one.
> There is one DECwriter / LA30 available. It is complete but will probably
> need care and attention to get working.
>
> Everything is located in Sweden so shipping can be rather expensive for
> heavier items.
>
> Trade for something interesting...
>
> /Mattis
>