Resurrecting the DB-19

[Brian Marstella]

You might check iec.net; I recently purchased several DB19M and DB19F
connectors from them at a reasonable price. They were out of the male DB19
solder-tail type connectors but substituted the pin-insert type instead.
For my purposes, either would work. They also had a 25 pin to 19 pin cable
for the Apple Dual Disk drives that seems to be working perfectly and quite
a bit cheaper than several alternatives I looked at. Melinda was very
helpful in processing the order.

Regards, Brian.

On Sun, Jun 5, 2016 at 5:02 PM, Alexandre Souza <
alexandre.tabajara at gmail.com> wrote:

>
> http://tabajara-labs.blogspot.com.br/2015/05/fazendo-o-expletiva-cabo-da-duodisk.html
>
> Better than nothing :)
>
> 2016-06-05 14:34 GMT-03:00 Ali <cctalk at ibm51xx.net>:
>
> > Sweet. No where can I order 10 or so at a reasonable price? There is a
> guy
> > one ebay selling one with hood at $22 a piece....
> >
> > -------- Original message --------
> > From: Liam Proven <lproven at gmail.com>
> > Date: 6/5/2016  1:55 AM  (GMT-08:00)
> > To: "Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
> > Subject: Resurrecting the DB-19
> >
> > June 4, 2016 ↔ 10 comments
> >
> > *DB-19: Resurrecting an Obsolete Connector*
> >
> > Oh man, this is good! You’re looking at the first DB-19 connector to be
> > made in the 21st century...
> >
> >
> >
> http://www.bigmessowires.com/2016/06/04/db-19-resurrecting-an-obsolete-connector/
> >
> > --
> > Sent from my phone - please pardon brevity & typos.
> >
>